凈化實驗室系統工程
凈化實驗室系統工程
凈化實驗室系統工程
凈化實驗室系統工程
凈化實驗室系統工程
Clean room / 潔凈室
Refers to the removal of contaminants particles, air space within the scope of the harmful air, bacteria, and the indoor temperature, cleanliness, chamber pressure, flow velocity and flow distribution, noise vibration and lighting, electrostatic control in a certain range of needs, and the specially designed room the. That is how regardless of external air conditions change, its interior can have both maintain the original setting characteristics of cleanliness, temperature and humidity and pressure etc performance requirements of clean.是指將一定空間范圍內之空氣中的微粒子、有害空氣、細菌等之污染物排除，并將室內之溫度、潔凈度、室內壓力、氣流速度與氣流分布、噪音振動及照明、靜電控制在某一需求范圍內，而所給予特別設計之房間。亦即是不論外在之空氣條件如何變化，其室內均能俱有維持原先所設定要求之潔凈度、溫濕度及壓力等性能之特性。
Layout of processing plane in clean room should be reasonable and compact, only arranging necessary processing equipment and processes, studio with air cleanliness class requirements indoor. Processes with high level air cleanliness requirements should be arranged on the windward side. Processing equipment that is easy to produce pollution should be arranged closing to the air outlet position.
潔凈室工藝平面布置應合理、緊湊，室內只布置必要的工藝設備，以及有空氣潔凈度等級要求的工序和工作室。潔凈室內要求空氣潔凈度等級高的工序應布置在上風側，易產生污染的工藝設備應布置在靠近回風口位置。
It generally includes three parts, i.e. clean section, quasi clean section and auxiliary section. In order to minimize the pollution caused by human activities in operation, staffs should change protective apparels, shower, bath, and disinfect before entering the clean section. And all kinds of objects must be purified before entering the clean section. Material purification route should be separated from human purification route. If materials and personnel can only enter the clean room at the same place, they also should enter the door separately. Materials firstly go through rough purification treatment.
一般包括潔凈區、準潔凈區和輔助區三部分。為了在操作中盡量減少人活動產生的污染，人員在進入潔凈區之前，必須更換潔凈服并吹淋、洗澡、消毒，同時各種物件在送入潔凈區前也必須經過凈化處理，物料凈化路線與人凈路線應分開，如果物料與人員只能在同一處進入潔凈室，也必須分門而入，物料先經過粗凈化處理。
